Skip to main content

MPA40BT

All-in-one portable PA system with Bluetooth streaming, battery operation, combo inputs and a transport handle

Where to buy MPA40BT (0313-AEV)

Sing where the people are, not where the sockets are.

Your audience is not always near a power outlet. The MPA40BT runs from its built-in rechargeable battery for up to 12 hours. Carry it by the handle and set up where the song belongs.

Voice, guitar and backing track in one box

Plug a mic or an instrument into each INST/MIC IN combo jack, over XLR, ¼" TRS or ¼" TS. Stream a backing track from your smartphone over Bluetooth, or connect a line source to the RCA inputs. The RCA signal is merged with Bluetooth, and BT/AUX LEVEL sets the gain for both.

MPA40BT, image 2 of 4

The whole mix on a few knobs

MIC 1 and MIC 2 LEVEL set the gain for each input. BASS and TREBLE adjust the overall sound, and MAIN LEVEL sets the volume. Frequency response is 45 Hz to 18 kHz.

MPA40BT, image 3 of 4

Go wireless when you want

The WIRELESS SYSTEM USB input accepts the optional Behringer wireless microphone receiver, for 2 independent Behringer ULM mics. Connecting it disables the MIC 1 and MIC 2 combo jacks. Battery level LEDs show the remaining charge when you are unplugged, and a full charge takes about 6 hours. The IEC cable is included, and the MPA40BT weighs 8.2 kg.

MPA40BT, image 4 of 4